It is here, the new benchmark in water/meth delivery.  Performance of the exotic expensive kits, priced with the inferior antiquated kits, you simply cannot go wrong with a TS water/meth kit.

At the heart is the TokenSolutions Pump Controller-

Features include:

1. - flow switch
2. - tank level switch
3. - fault output for EMS or relay based safety
4. - fault logic detects lack of flow/leak, pump short, pump ground, low tank level.
5. - Custom flow increase output curve for progressive delivery
6. - Works with both 0-5vdc mappable and auxiliary injector driver outputs
7. - Works with your piggyback/EMS's output and software, making for easy tuning, as if your piggyback/EMS is directly controlling the pump. The advantages of this is not simply making tuning easier, but allows one to set-up safeties, and custom tunes rheostats simply cannot provide.
8. LED output shows fault codes and progressive water/meth delivery.

Augmenting the controller is an AEM pump and AEM nozzle and hose line kit.

1. AEM's pump is truly pulseless using their exclusive bypass valving. 
2. Quick connects are integrated into the pump
3. 48" of hose line
4. Quick connect "T" fitting for additional nozzles
5. Nozzle "injector" housing with integrated check valve
6. Three different nozzle sizes to support a large range of power goals (.0155, .0315 and .0630 sizes)

Additional parts-

1. Flow switch
2. Relay pack
3. Harnesses
4. Fuse
5. Electrical fittings
6. Instructions

The Pump Controller has custom firmware to accurately delivery a progressive spray with a progressive linear input from your piggyback or EMS.  The Pump Controller works via your piggyback/EMS's auxiliary 0-5vdc mappable or auxiliary injector output.  This makes your water/meth control as accurate and tune-able as your EMS unit itself!! And better yet tune-able in the same software/screen interface saving one the headache of various software programs and/or dialing rheostat nobs!!  The Controller as has a safety output signal, when any of the faults are detected, be it low tank level, pump failure or a leak!!  This safety output can be used to trigger a safe tune or mode with your piggyback/EMS or a relay for an exterior safety system.

One does not need to look further.  This kit is simple in installation and operation, yet insanely complete in ability and safety.  With TS's experience, thorough R&D and customer service, you will not be looking elsewhere for you subsequent water/meth needs.