** SOLD OUT UNTIL FURTHER NOTICE-- NO KNOWN ETA **

This is TokenSolutions R&D concept device that proved to be a hit.  It had since evolved into the Gen 1.5 model that allowed one to change settings on the chip for different year models.  And now TS is introducing the Gen 2.0!!

This unit is for the post cat sensors, known as "sensor twos" and technically as B1S2 and B2S2.  The PNP Delete is universal between all year models!! (2001-2005- all first Gen IS300s).  Reap the benefits of the TokenSolutions wire-in dual output simulator but on a whole new scale, also simulate the two heater signals, all in a sealed, tasteful enclosure, and all Plug and Play!  The Delete has two wire looms that plug into the locations where the B1S2 and B2S2 sensors plug in.

Maintain your OBDII diagnostic abilities on your off-road race Lexus IS300 without the hassle of keeping the downstream sensors plugged into the exhaust stream and/or their harness.  You no longer need to put bungs in for them, use fouler devices requiring machining, and eventually new sensors and luck.  If you already have bungs for those old OE sensors you can now use them for wideband, EGT or other devices!  Avoid ANY wiring into your OE harness!  True Plug’n'Play!

FOR OFF-ROAD USE ONLY!

LEXUS IS300 & MKIV 2JZ-GE Supra

Sensor Simulators are not CARB Approved, and are never to be used on Pollution Controlled Vehicles or on Public Highways